Parameters Introduction：
ML /ML-B NSPT-LOCKS has the characteristics of structure simplicity, easy self-installation, high concentricity,
and good durability. It can be quickly assembled without any additional equipment and has wide range of
selection for various sizes.The smallest width can be only 10mm.
The installation of ML /ML-B NSPT-LOCKS is as followed:
Tighten the screw nuts to move the outer taper ring axially.External force will be formed on the connecting
surface between the shaft and the hub due to the frictional force on the taper surfaces between both inner
and outer rings. The connection is strong and safe in shaking situation as well because of the self-locking
feature and the strong frictional force between the parts.
Simply reverse the installation procedures for disassembling the ML/ML-B NSPT-LOCKS.
Product range：
Standards | Series Type | SizeRange |
ANSI/DIN | ML-B | CL5x16ML-B至CL75x100ML-B |
ANSI Catalog:
ANSI ML-B Type CAPT-LOCKS.pdf
DIN Catalog:DIN ML-B Type CAPT-LOCKS.pdf
<center id="agplk"></center>